Accessories

Zipp's 303 Firecrest Tubeless wheels are designed for the real world—a world of imperfect conditions, varying road surfaces, and elements where the bottom line is simple: efficiency = speed. They're faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all. Deeply rooted in Zipp's drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced wind resistance, rolling resistance, rider fatigue, and weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 32mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider. At the center of the 303 Firecrest Tubeless is a versatile and durable new hubset, the German-engineered ZR1 DB. This hubset features 66 points of engagement for quicker response. The 303 Firecrest Tubeless wheels are for dedicated cyclists who aspire to the latest in technology. They're for those who compete in races, against peers, or simply to conquer personal limits. - New Zipp graphics and cosmetic identity that scream speed - Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile - Lighter weight than its predecessor, making it nimble and fast - Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire. - Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road - 40mm rim depth makes a light and aero wheel in every situation - Ships with 12mm end caps - Center Lock rotor interface (lockring included)

Zipp's 303 Firecrest Tubeless wheels are designed for the real world—a world of imperfect conditions, varying road surfaces, and elements where the bottom line is simple: efficiency = speed. They're faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all. Deeply rooted in Zipp's drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced wind resistance, rolling resistance, rider fatigue, and weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 32mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider. The 303 Firecrest Tubeless wheels are for dedicated cyclists who aspire to the latest in technology. They're for those who compete in races, against peers, or simply to conquer personal limits. - New Zipp graphics and cosmetic identity that scream speed - Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile - Lighter weight than its predecessor, making it nimble and fast - Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire. - Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road - 40mm rim depth makes a light and aero wheel in every situation - Ships with 12mm end caps - Center Lock rotor interface (lockring included)

Works with Zipp butyl inner tubes with a removable core as well as other leading tubular tires and inner tubes that have removable cores. Available as a kit (3 extenders and 2 wrenches) or individually. - For use with removable valve core Presta tubes - Knurled end to keep pump from slipping - 3mm hex broach in the barrel to guarantee a perfect seal when tightened - Integrated air seal

Hitch rack swing adapter. Now you can rack up the bikes and still access your tailgate. The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido. Product Details: - Hitch extension converts most 2" hitch products to a swing-away rack - Provides easy tailgate access - even with a rack fully loaded with bikes - Easily swings open 90 degrees and locks in place with the simple to use release lever - Safety latch secures the rack closed while you're on the road - Secures to any 2" hitch receiver using a threaded pin - Included SKS (Same Key System) lock keeps the rack secure - 250 lb maximum load capacity (rack plus gear) Product Specs: - Weight: 35.46 lbs - Dimensions: L 20.00" x W 30.00" x H 8.00" Installation Details: - Some Assembly Required - 10 Minute Install - 2" Hitch Receiver Required Compatible with the following: - Dr.Tray- 2" only (without the EZ+1 attached) - SingleSpeed - HangOver 4 - 4 Bike only - TwoTimer - HoldUp EVO - HoldUp EVO +2 - HoldUp - HoldUp +2 - FourTimer - LongHaul (Vans and Passenger Vehicles Only) - RoadTrip (Vans and Passenger Vehicles Only)

This handy add-on doubles your HoldUp bike hitch carrier's capacity from 2 to 4 bikes—perfect for quadruplets on a family outing. Holds up to two bikes. - Expands your bike-hauling capacity from 2 to 4 bikes - StrongArm design secures bike at wheels, protecting paint and carbon frames - Fits 20" – 27.5" wheel sizes with tires up to 3.0" wide and 29" tires up to 2.5" wide - Accommodates bike wheelbases up to 48" - Accommodates disc brakes, through axles, and full suspension bikes - Tilts down with bikes loaded for rear-of-vehicle access - Side-to-side adjustability to adjust space between bikes - Carries 2 bikes (2" receiver only) - 4 bikes, 200 lbs total, with the HoldUp Product Specs: - Weight: 49.00 lbs. - Dimensions: L 56.50 in x W 64.00 in x H 12.00 in - Limited Lifetime Warranty

Make that spare tire work for a living – the SpareRide easily attaches to your rear-mounted spare and turns it into a bike rack. Durable, stable and secure, it installs easily. SuperCush cradles securely hold and protect your bikes, a bottle opener opens bottles, and integrated SKS locks bum out bike thieves. - SuperCush ZipStrip cradles secure the bikes and make loading and unloading a breeze - ZipStrips secure bikes to the rack and are fully removable - Anti-sway cradle design minimizes bike-to-bike contact - Fits nearly any stock size spare - SKS locking package secures bikes to rack to help prevent theft - TireTread pads add stability and protection - Steel construction is strong and durable - Universal mounting plate with extension fits most lug patterns - Locking knob secures rack and sparetire to vehicle - Yakima signature bottle opener lets you enjoy a post-ride cold one - 2-bike capacity TECHNICAL SPECS - Weight: 21.50 lbs - Dimensions: L 40.00” x W 13.00” x H 19.00”

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

Rims: WTB DX18 700C / 29'' (ETRTO 622), inner width: 18 mm - Anodized black finish - CNC machined sidewalls - Stainless steel eyelets - Rim wear indicator - Pinned joint - Drilled for Schrader valve - 36 holes Rear hub (041813-02-700): Alloy, Freewheel, Sealed, Quick Release, Hollow CrMo axle M10x135mm - Anodized black - Adjustable bearings - Quick Release Binders Incl. Rear hub (041813-03-700): Alloy, Shimano HG, Sealed, Quick Release, Hollow CrMo axle M10x135mm - Anodized black - Adjustable bearings - Quick Release Binders Incl. Rear hub (041813-04-700): Alloy, Shimano HG, Sealed, Quick Release, Hollow CrMo axle M10x130mm - Anodized black - Adjustable bearings - Quick Release Binders Incl. Assembled in North America by experienced wheel builders using Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

- Made in U.S.A. (Maysville, KY) - Shallow baskets carry notebooks, boxes or other articles that lie flat - Dimensions: 15 x 10 x 4.75 inches; the basket tapers to 13 x 8 inches at the bottom - Extended handlebar clamps fit 7/8" and 1" diameter handlebars, and 1 3/4" apart to offer clearance for shift and brake cables - Baskets have 2-piece legs which extend from 14 inches to 22 inches and mount to either the axle or fork eyelets on bikes with quick release front hubs - 1372 has a Zinc plated finish; 1372GB has a Black Powder Coat Finish - Complete basket with fittings weighs 2.2 lbs.

The Giant Delivery basket is one of the most enduring and iconic products in Wald's catalog. Popular among messengers and paperboys (feel free to ask your father or grandfather about this noble profession), this basket is designed to carry large loads thanks to its stout legs, cargo bands, and heavy-duty handlebar clamps. - Made in U.S.A. (Maysville, KY) - Great for delivery, industrial bikes and hauling large loads - Reinforcement bands add extra strength - this basket is built for rugged use - Dimensions: 21 x 15 x 9 inches; the basket tapers to 18.25 x 12.25 at the bottom - Extended handlebar clamps allow greater clearance for shift and brake cables. They are 3 5/8" apart and fit 7/8", 1" and 31.8mm diameter handlebars - Legs extend from approx. 14 1/2 inches to 23 inches and have two mounting holes for mounting to either the axle or fork eyelets for bikes with quick release front hubs - 157B has a Zinc plated finish and 157GB has a Black Powder Coat Finish - Complete basket with fittings weighs 7.8 lbs.

Wald's 10252 training wheels are designed to mount on most single speed bicycles with 16- to 20-inch wheels and are intended for use by riders weighing up to 100 pounds. These training wheels feature new frame adapters that improve installation. The new frame adapters enable this wheel set to be mounted on bicycles with .75 and 1.00-inch rear frame tubes. The training wheels can also be mounted onto bicycles with 1.25-inch rear frame tubes when the frame adapters are not used.

Wald's 742 training wheels feature three slots on the brace arm allowing this wheel set to mount on most single speed bicycles with 16- to 26-inch wheels. The brace arms are designed to fit rear frames tubes up to .75 inches in diameter. This model is intended for use by riders weighing up to 125 pounds. - The Wald Training Wheels fit 16- to 26-inch bicycles. - The Wald Training Wheels support riders up to 125 pounds.

The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes

The Corsa has been the race-day choice of pros for years and is now better than ever. The Corsa achieves the holy grail of performance: speed, suppleness, durability, and reliability. Whether winning a Grand Tour, or a local crit, the Corsa family delivers world-class performance. - 320 TPI Kevlar reinforced Corespun-K casing for increased sidewall protection - 4 separate Graphene rubber compounds

Speed and reliability for riders pursuing a new performance level Corsa N.EXT is the exciting new addition to the Corsa family. Designed to satisfy the requirements of enthusiast cyclists who clock up the miles on long and demanding weekly rides, Corsa N.EXT combines Vittoria's peerless knowledge of racing performance with the durability of a long-lasting nylon casing that uses a unique Silica and Graphene compound for improved rolling efficiency, grip and longer wear-life. To increase puncture protection, the central section of the casing features 3 layers of nylon as well as an additional puncture protection belt. Corsa N.EXT is the first road racing tire to feature a QR Code—printed on the tire hot patch—for easy access to useful technical information about the tire. Racing inspired speed and feel, with the everyday durability of nylon construction - New combination of Silica and Graphene compound for improved rolling efficiency, grip and longer wear-life - Nylon casing provides durability, for daily racers who want to raise the bar of their performance relying on a long-lasting tyre - Proven tread design used by Vittoria teams in the World Tour

Designed for intensive training, it is equally suitable for racing events. The Rubino Pro builds on the standard Rubino platform, utilizing the same exclusive 3C Graphene compound structure, long service life, puncture protection, and sharp handling traits, but substitutes a folding bead material for reduced weight. The Rubino Pro has long been a favorite for both training and racing, and with the addition of Graphene technology compounds, is more versatile than ever! - Graphene rubber compounds

Whether in Gravel or Cyclocross, one thing is for certain-course conditions are constantly changing. When you roll up to the start line, be confident knowing that you have the performance advantage of the Terreno Mix all conditions tread, no matter the terrain. At the heart of the design is a fast rolling center ridge, which is designed to minimize rolling resistance, while still providing confident braking traction. Cornering and off camber work is confidently handled by alternating open shoulder lugs. These lugs are shaped to allow a supple feel for pavement and hardpack surfaces, while still offering a solid effective edge for grass and loam terrain. The exclusive 3C Graphene compound structure places 3 unique compounds where you need them most, adding to the performance. - Exclusive 3C compound construction featuring Graphene compound technology - Fast rolling center-ridge design - Open shoulder lugs for secure off-camber traction - Traditional tread profile, for smooth transitions, across varied terrain - Approved for use with hookless rims

Vittoria introduces Universal Sealant, the new range of anti-puncture bike tire sealants designed for Road and MTB use. The formula of the sealant has been improved. Universal Sealant does not contain ammonia, repairs larger punctures (up to 7mm), acts faster, and is compatible with both Road and MTB tubeless tires and with any type of inner tube. It is easy to use thanks to its specific pour spout that allows the application of the sealant straight from the valve. Universal Sealant is the universal anti-puncture bike tire sealant.

The industry standard in performance training tires is back with a refreshed design and increased performance! The subtle center grooves and shoulder texture retain the secure feel of the Zaffiros of the past while streamlining the look and feel for the future. The alternating slick profile and Graphene compound mimic the feel of the Zaffiro's higher-end siblings while adding durability and a more approachable price point. - Extremely durable tires for performance training - Graphene 2.0 compound and folding bead increase performance - Modern tread design for long-lasting durability

Growth and mature in gravity segment that demands tires have great performance for varieties of terrain from mud, dry or loose soil. Flow Snap is expanded into Plus Size with more air volume for more fun in trail.

Three most popular TORX sizes: T10, T15 and T25mm

MTB Hydro 3 is the hydration pack designed for the performance minded MTB cyclist, who’s searching for a premium pack with key features included and that will stay put on your back even in the most gnarly terrain. The pack is equipped with our bounce free No Dancing Monkey 1.2 harness system, with integrated elastic straps that allow freedom to breathe and move in action. The MTB Hydro 3 is geared up with a main storage compartment for hydration and a water-resistant phone pocket. A bonus is the smart detachable organizer pocket for tools, equipment and food. For race mode, just take it off for a slim profile.

Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

Made with recycled materials, this side-entry bottle cage offers easy bottle access on small frames and in tight spaces. SIDE LOADING FOR TIGHT SPACES The Side Load Recycled Water Bottle Cage lets you easily access bottles while you ride. It's built from recycled materials and fits neatly in small spaces, making it the ideal choice for smaller frames, full suspension bikes, and when using a frame bag. Great for mountain and road riding alike. Using recycled materials in this product helps provide second life to unwanted end of life plastics. PRODUCT DETAILS - Made using recycled plastic - Lightweight and durable composite construction - Side-loading design allows for easy bottle access on compact frames - Mount it on the down tube for left-side water bottle access - Mount it on the seat tube for right-side water bottle access - Suitable for road and mountain use

Made with recycled materials, this side-entry bottle cage offers easy bottle access on small frames and in tight spaces. SIDE LOADING FOR TIGHT SPACES The Side Load Recycled Water Bottle Cage lets you easily access bottles while you ride. It's built from recycled materials and fits neatly in small spaces, making it the ideal choice for smaller frames, full suspension bikes, and when using a frame bag. Great for mountain and road riding alike. Using recycled materials in this product helps provide second life to unwanted end of life plastics. PRODUCT DETAILS - Made using recycled plastic - Lightweight and durable composite construction - Side-loading design allows for easy bottle access on compact frames - Mount it on the down tube for right-side water bottle access - Mount it on the seat tube for left-side water bottle access - Suitable for road and mountain use

Original replacement rack for Trek 920. Product details - Designed to fit forks with forward-facing eyelets at the dropout - Designed specifically for use with Trek 920 bikes Specifications - Size: One size - Rack type: Front racks - Adjustable feet: No - Disc compatible: Yes - Includes light mount: No - Weight capacity: 50 lbs (22 kg) - Material: Aluminum

Made using recycled materials, this bottle cage features durable, affordable composite construction for road or MTB use. YOUR ECO HYDRATION STATION The Elite Recycled Water Bottle Cage provides the same secure bottle hold as the carbon Pro Cage in a more economical and eco-friendly form. The cage is made from recycled composite material and is available in a wide variety of colors to suit your bike from trail to tarmac. PRODUCT DETAILS - Made using 67% post-consumer recycled ocean plastic - Super strong and lightweight construction - Secure bottle retention suitable for road and mountain use - Available in a wide variety of colors

Both kids and parents will love Topeak's BabySeat II. It's suspended to provide little ones with an extra-plush ride and it boasts important safety features, such as adjustable foot rests and safety straps, a quick-release padded safety bar, a 4-way safety harness, and dual safety latches that lock the seat to the included disc brake-compatible rear rack.

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - 625g - 55lb weight capacity